기사 (2,744건)
[Facility & Technology]
Hyundai Steel Additionally Obtains KS Marks on New HR for Use in Welded Steel Structure
방정환 | 2009-10-23 08:00
[Facility & Technology]
Baemyung Metal’s Production of Long Products with Titanium Getting Full-Scaled
유재혁 | 2009-10-22 19:02
[Facility & Technology]
POSCO Completes Southeast Asia’s Largest CR Plant
방정환 | 2009-10-22 19:00
[Facility & Technology]
Hamyang Steel Launches into Electric Furnace Business
박형호 | 2009-10-22 18:01
[Facility & Technology]
Dongkuk Steel’s Mass Production of Plates Getting Closer
방정환 | 2009-10-22 18:01
[Facility & Technology]
POSCO is currently under the repair works of its Wire Rod Mill II and Billet Mill.
곽종헌 | 2009-10-20 08:00
[Facility & Technology]
POSCO Puts High Mill Operation on Normal Track
방정환 | 2009-10-19 19:02
[Facility & Technology]
Capability Utilization Rate of Rebar Makers Drops
박형호 | 2009-10-19 19:00
[Facility & Technology]
NEXTEEL Constructs 3-Inch Heavy Wall Steel Pipe Production Line in Pohang
김상우 | 2009-10-15 19:02
[Facility & Technology]
POSCO Establishes New Local Unit in India
방정환 | 2009-10-15 19:00
[Facility & Technology]
Hyundai Steel’s Construction of Integrated Steelworks at Finalization Stage
박형호 | 2009-10-15 18:04
[Facility & Technology]
SeAH Steel Obtains New KS Mark for Carbon Steel Pipes for Use in Fuel Gas Plumbing Works
김상우 | 2009-10-12 19:02
[Facility & Technology]
Hyundai Steel Builds Reheating Furnace for Plate Mill
방정환 | 2009-10-12 19:00
[Facility & Technology]
Local Rebar Makers’ Annual Production Capacity Expected to Reach 13 Million Tons in 2013
박형호 | 2009-10-12 18:04
[Facility & Technology]
POSCO Installs World’s Largest Roughing Mill at New Plate Plant of Gwangyang Works
방정환 | 2009-10-09 13:03
[Facility & Technology]
LS Ind. Systems Expected to Start Up STS Roll Bender in November
김상우 | 2009-10-09 13:03
[Facility & Technology]
Pre-Painted Steel Sheet Makers Enjoy Good Capability Utilization Rate in 3rd Quarter
서의규 | 2009-10-09 13:03
[Facility & Technology]
Electric Furnace Steelworks’ Monthly Working Days of October Expected to Be 27
박형호 | 2009-10-05 19:00
[Facility & Technology]
Steel Pipe Makers’ Capability Utilization Rate Stays at 43% in January-August
김상우 | 2009-10-05 18:04
[Facility & Technology]
Dongkuk Steel’s Dangjin Plant to Start Producing Plates in November
방정환 | 2009-10-01 18:04
[Facility & Technology]
Posteel inaugurates JV in Japan.
방정환 | 2009-10-01 17:00
[Facility & Technology]
POSCO Accelerates Localization of Materials for Desalination Plants
방정환 | 2009-09-29 08:00
[Facility & Technology]
EEW Korea to Start Producing STS Heavy Wall Pipes in November
김상우 | 2009-09-28 19:00
[Facility & Technology]
Development of New Automotive Steel Sheets Gains Momentum
곽종헌 | 2009-09-28 18:05
[Facility & Technology]
POSCO C&C to produce aluminium coated stainless sheet.
유재혁 | 2009-09-28 18:01
[Facility & Technology]
Dongkuk Steel Incheon Works to install a new EF.
박형호 | 2009-09-28 18:00
[Facility & Technology]
KCT Develops New Clad Steel Sheets to Replace Beryllium Copper
김상순 | 2009-09-24 18:04
[Facility & Technology]
POSCO Expands Automotive Processing Center in Nagoya
방정환 | 2009-09-21 19:02
[Facility & Technology]
Union Steel Completes No.5 CGL, No.5 CCL
유재혁 | 2009-09-21 18:04
[Facility & Technology]
Capability Utilization Rate of Rebar Mills Expected to Reaches 80% Again in September
박형호 | 2009-09-17 19:00